Which 10’’ subwoofers best suit your home theatre? That’s a million-dollar question for audiophiles today!
A 10-inch subwoofer is of great value to bring you an amazing sound experience with clear bass thus saving you from listening to boomy and muddy audio experience while you are playing your music high.
Let’s find out more about the Best 10-inch subwoofer home theater
A little about Subwoofer
Subwoofers are special loudspeakers designed to perform specific tasks. The way the US navy seal is designed and trained in undertaking breathtaking operations, the subwoofer is also designed to reproduce low-frequency audio, which is also otherwise termed as bass. The woof from the woofer usually refers to the low sound produced while a dog barks.
Quality comes first, so while you are looking for the best suitable subwoofers in the market, it can be a hectic task and you would feel like searching for a needle in a haystack if you don’t know what you are looking for. Our guide will pave a smoother way for you to understand subwoofers and find the best possible one for you.
A subwoofer can benefit you in numerous ways! A few of the benefits are to be mentioned:
- Enhance your bass
- Distortion-free frequency response
- Multiple options to install and easy setup
While opting for the best 10” subwoofers the most important features which are needed to be checked are:
- Power handling capability: This is the first and foremost check feature while buying a 10” subwoofer. The better the power, the better it brings a mesmerizing audio experience for sound enthusiasts.
- Longevity: You need to check the durability of your subwoofers. Quality subwoofers usually have a minimum warranty of 1 year.
- Response of frequency: Great subwoofers reproduce the frequencies to provide you mesmerizing distortion-free audio experience. So while buying a subwoofer you need to check the frequency response of your subwoofer.
Subwoofers have wide varieties in terms of quality and price. Varieties come in terms of qualities. You can opt for 10-inch subwoofers that bring you home theatre immersive experience with extraordinary sound, powerful and deep bass with amplifier. On the other hand, the price can also be a matter of concern for your choice. The table below gives you a glance at the subs you are looking for in terms of your choice before we move on to an in-depth analysis.
Best home theater 10-inch subwoofer
Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer, 300-Watts
Pioneer Elite SW-E10 is everything to meet your meet expectation and satisfaction. Although a tad bit expensive it gives top-notch sound quality for a home theater and brings an immersive experience for the users. Pioneer Elite SW-E 10 brings the best audio output while operating at high volume due to its low impedance. With its impedance of 4 ohms and a sensitivity of 85 dB, it provides audio with a dynamic frequency range without distortion.
The Elite is designed in a way to regenerate the low frequencies to produce dynamic music and film soundtracks. You ought to relish the deep bass and ever-pleasing audio. The 10″ long-throw woofer and the 2″ voice coil is incorporated to provide greater power handling. Motor and suspension permit 1″ of peak-to-peak linear movement of the cone. The down-firing driver is housed in a very solid, sealed enclosure. Digital Signal Processor ensures most one-dimensionality and output while no distortion. Integrated BASH electronic equipment provides up to 600 watts peak power (300 Watts RMS)
- 10-inch long-throw woofer
- Sealed enclosure with DSP processing
- 300 Watts RMS power handling capability with 600 Watts peak
- 2″ Voice Coil for greater power handling
- Integrated BASH amplifier provides up to 600 watts peak power (300 Watts RMS)
Sony SACS9 10-Inch Active Subwoofer
Sony’s products need less description and need not mention how much satisfaction they bring to the users while operating. Sony SACS9 is a synonym to perfection to give you that extra bit of satisfaction while you are experiencing your tunes. The 10-inch subwoofer resembles the utmost pleasure to provide you with a home theater immersive audio experience.
It was brought to the market to enhance your movie, music, and gaming experience to the next level with a speaker that delivers full-frequency audio with a three-way coaxial, four-driver speaker system comprising a frequency response of 28–200 Hz.
It delivers a robust 5.1.2 home theater setup perfect for Dolby Atmos with the complete range of CS speakers from Sony with the SACS9 subwoofer, 2 SSCS3 tower speakers, 1 SSCS8 center channel speaker, 2 SSCS5 bookshelf speakers, and 2 SSCSE Dolby Atmos-enabled speakers
10” Dual-layer mica woofer diaphragm delivers amazing sound and satisfactory bass response. One amazing feature that it comprises is the motion feedback technology which utilizes detection circuitry to correct variations in the input signal resulting in avoiding distortions.
- 115 W maximum input power
- Frequency Response: 28–200 Hz.
- 5.1.2 home theater setup
- RCA connectivity
- Motion feedback technology
Nakamichi Shockwave Ultra 9.2.4 Channel 1000W Dolby Atmos/DTS:X
This one is to look at in the future. It changes the ambience of your bed room and turners into a mini cinematic auditorium providing the best ever experience you can enjoy with its all-new Shockwafe Ultra 9.2 SSE Dolby Atmos / DTS:X Soundbar (2019), featuring Nakamichi. 9.2.4 channels of multi-dimensional surround sound with our signature dual 10” wireless subwoofers, 4 modular surround speakers and front side-firing effects tweeters that merge to deliver 360° moving audio around, above and beyond you.
Spatial Surround Elevation (SSE) processing technology: Spatial in the sense that it operates in spatial-amplification techniques and engages the 4-6 high-frequency tweeters located around the user (4 for 7.1/7.2 SSE and 6 for 9.2 SSE) to unlock extra details, enhance directionality and enlarge spaciousness of the surround sound experience.
- Soundbar with Dual 10″ Subwoofers
- Wireless & 4 Rear Surround Speakers
- High Bass
- 2-WAY SURROUND SPEAKERS
- FRONT SURROUND EFFECTS TWEETERS
- QUAD-CORE SURROUND PROCESSOR
Planet Audio AC10D 10 Inch Car Subwoofer
The cone of the AC10D 10-inch subwoofer is made up of Polypropyelene which is a buoyant and heavy duty material. The longevity of its subwoofers with the enthralling sound make it a key player in the market. The stamped basket helps it deliver a powerful and vigorous space to its user to listen to a more clear and accurate sound.
Let’s take a look at the surround of the brand. The foam of the surround is very resilient resulting in enhancing the efficiency of the subwoofer.
Great subwoofers possess great voice coils. The voice coil of planet audio can endure intense temperatures but still doesn’t overheat and thus has no impact on its performance. This feature enhances the play time sand minimizes weight.Its key specifications remains Resonant frequency – 39 Hz, Sensitivity SPL (1W/1m) – 87 Db, Depth 11” x Width 11” x Height 5.3
- 1500 Watts Maximum Power
- Dual 4 Ohm Voice Coil
- Long lasting and heavy duty
Skar Audio SDR-10 D4 10″ 1200 Watt Max Power Dual 4 Ohm Car Subwoofer
The Skar Audio SDR-10 D2 was developed to provide cinematic performance with its hard hitting, low frequency audio that brings rhythmic and amazing sound to the user experience. Designed with a high flux ferrite motor, this dynamic 10-inch woofer provides a RMS or continuous power of 600 Watts while the peak power apexes to 1200 Watts The SDR-10 has the capacity to reproduce low end frequencies with enough power.
The brand features an intense temperature copper voice coil which is 2.5-inches and is adjusted to a smooth and spectacular red spider system. The high roll foam surround and competition grade paper cone found on the SDR-10 D2, permits the woofer to produce motionless low end bass response that will exonerate the listener from all the stress and provide him a vibe to an immersive environment.
- Amazing sound
- Cinematic performance
- RMS power of 600 w and peak power of 1200 w
- High roll foam surround
BOSS Audio Systems CH10DVC 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer
A genuine 10 inch subwoofer provides an amazing sound experience and delivers a frequency range between 25-250 Hz with DUAL 4 ohm Voice Coil. It’s very powerful generating RMS or continuous power of 750 watts while the power can peak up to 1500 Watts.
Black injection molded polypropylene built cones and rubber built surround defines the heavy duty and long lasting performance of the subwoofers.
Before buying a subwoofer sensitivity rate is something worth looking at. Sensitivity rate elucidates the level of volume you will achieve from a speaker given the amount of the power. Not to mention that 84 decibel sensitivity helps Boss audio provide the best audio experience for its users. It’s designed to be used in sealed and ported enclosures.
- One 10″ Woofer with DUAL 4 ohm Voice Coil
- 1500 Watts peak and 750 Watts RMS Power Handling
- 84dB Sensitivity, 38 Hz Resonant Frequency
- Polypropylene Cone and Rubber Surround
- Frequency Response 25-250 Hz
- 3 Year Platinum Online Dealer Warranty
KICKER CompR 10″(25cm) Subwoofer, DVC, 4-ohm, RoHS Compliant
Let your music bring an immersive experience with the enthralling sound experience and shake your room by its 84.6 dB sensitivity.
A plus point when you opt to buy it would be the 4- ohm dual voice coils make things facile for the KICKER to bring accuracy and precision in your audio experience. It endures a peak power of 800 watts and an Recommended Amplifier Power (RMS power) of 400 watts making the audio experience even better for its users.
The heat controlling system incorporating an air cooling system aids the subwoofer remain 25% cooler. Installation requires 5.25-inch mounting depth and 9.12-inch mounting diameter.
- 4 ohm dual voice calls
- Impedance (ohms): 4 DVC
- Sensitivity: 84.6 dB
- Efficient thermal management system
- Peak power 800 w and RMS power 400
Best affordable 10 inch subwoofers below 100$
Sound Ordnance M2-10DVC 10″ subwoofer with dual 4-ohm voice coils
Trying to opt for a subwoofer that provides a booming audio experience with the best possible price in the market. There’s every reason for you to have a look at the Sound Ordnance M2-10DVC. It has an impedance of just 2 ohms which makes it quite efficient to pass the audio (whether it is music, movie, or games) through the speaker.
The M2-10DVC 10″ subwoofer brings a scintillating look as it is built with a tough glass fiber cone that helps keep the shape unchanged while buzzing with its amazing audio which further results in keeping your bass accurate. The butyl rubber surround helps you trace the subwoofer’s movement and also makes it long-lasting and strong enough in quality.
The 3 years warranty of the product brings your inner peace and hassle-free extraordinary audio experience. Don’t forget that it is achievable with a relatively much lower price compared to its other competitors around the market.
- 10″ subwoofer with dual 4-ohm voice coils
- Cone is made up of glass fiber
- peak power handling: 300 watts with RMS power handling capability of 50-150 Watts
- Frequency Response: 33-1000 Hz
- Sensitivity: 87.9 dB
- Longer warranty of 3 years
- 2 ohm impedance
Rockford Fosgate R2D2-10
Rockford Fosgate’s Prime R2 subs provide powerful bass in your car, and the long lasting configuration made it a worth looking brand around the market. The R2D2-10 sub features a 10″ mica-injected polypropylene cone that associates with a highly compact poly-foam surround to search the low frequency audio and provide you amazing sound experience.
Dual 2-ohm voice coils permit its users to wire this sub for 1- or 4-ohm impedance,providing you more resilience while installing the system. Rockford Fosgate optimizes this Prime sub for each sealed and ported enclosure thus you’ll be able to select the kind of bass you would like in your ride.
Yes it’s affordable. Although the price might vary a bit from time to time, still be sure that you are getting the opportunity to buy this product with less than 100 dollars.
Standard power management: 10” subwoofer delivers 200 Watts RMS and the 2-Ohm Dual Voice Coil design allows you to incorporate them into various configurations.
Stamp-cast baskets feature is used to keep the motor cool.
- Excellent audio experience with powerful bass
- Stamp-cast baskets cooling system
- 1-4 ohm impedance
Alpine W10S4 BassLine Series 10″ 4-ohm subwoofer
While typical loudspeakers allow you to hear the sound, an Alpine W10S4 makes you feel the sound.Now that you are enamored of your car sound you definitely understand the importance of bass. Alpine W10S4 has created a bassline series subwoofers so that you can enjoy the low frequencies to your utmost pleasure. You can buy it with the blink of your eye without being much stressed about your bank account.
Alpine’s BassLine W10S4 10″ subwoofers are made of polypropylene/mica cone which make the sub rigid in nature so that the audio level is not distorted and maintain the accuracy level to your satisfaction. The poly-foam surround and tough steel frame is a great support to the cone to boost the audio. Most of the amplifiers connected with the subwoofer find it a great ambience to perform superb as this sub handles up to 250 watts RMS/continuous power and its 4-ohm impedance .
- Very much affordable
- peak power: 750 watts
- sensitivity: 86.6 dB
- 4 ohm impedance
- Polypropylene/mica cone
- Poly-foam surround
- Tough steel frame
JBL 102AM Stage Series 10″ 4-ohm component subwoofer
Great bass typically depends on your notecase, as a pleasant sub and powerful amp will value serious money. Currently JBL steps up with some facilitation for the bass-hungry, planning their cheap Stage subs to assist you get sturdy bass once your bank account’s a bit weak.
If you are looking for a wallet friendly sub with an extraordinary bass and strong amplifier you can opt for JBL 102AM. Usually bass and amplifiers are key to best subwoofers so they actually cost high, but this is a miracle to say that JBL 102AM brings you the opportunity to not press your bank savings but still be satisfied with the performance of this sub.
The resplendent power management capacity of the sub makes it even more charming and glamorous. This reliable Stage 102AM is one of its kind built of a polypropylene cone to keep the sound rigid while the volume is high, braced by a high-roll rubber surround that keeps the sound safe from distortion even if the amplifier vibrates in boom.
It has an RMS power handling capacity of 225 Watts with the peak power handling capability of mammoth 900 Watts peak so you don’t just need to get tensed about the bass at all.
- 4-ohm impedance
- polypropylene cone
- rubber surround
- power handling: 225 watts RMS (900 watts peak)
- frequency response: 35-200 Hz
- sensitivity (2.83V at 1 meter): 89 dB
Kicker 44CWCD104 CompC Series 10″ subwoofer with dual 4-ohm voice coils
Kicker has got decades of vast experience making them as artists in the field of bass. For your highest satisfaction they have come up with the CompC Series 44CWCD104 10″ subwoofer that bears key attributes of a flex-resistant polypropylene cone to make the sound rigid in nature and maintain the best accuracy possible and provide you amazing audio experience without distorting the sound.
On the other hand the razzed foam surround with its familiar yellow stitching brings your mood for an expedition up around the hills with your buddies and fall in love with the sub.
The strength of this sub is also quite phenomenal keeping in mind that it can manage an RMS power of 250 Watts and a peak power of 500 Watts.
- injection-molded polypropylene cone
- ribbed foam surround
- handles up to 250 watts RMS (125 watts per coil)
- peak power handling: 500 watts
- frequency response: 30-500 Hz
- sensitivity: 86.2 dB
Best sounding 10 inch subwoofer
Kicker CompC 44DCWC102 600 Watt RMS Dual 10 inch Subwoofer Enclosure – Single 2 Ohm Voice Coil
The ultimate option to immersive audio experience while planning for a long excursion or an instant long drive with your nearest and dearest ones. First to mention its sensitivity of 98.4 dB which is extraordinary in terms of quality. This reputed Kicker 44DCWC102 dual 10” subwoofer keeps a up to the mark balance to quality and price with its heart winning single voice coil, 10” CompC 2 Ohm impedance (44DCWC102).
The highlight of this subwoofer is its strong construction that football players are legendary for. CompC brings in the amazing Kicker technology to maintain its international reputation.resulting in providing booming audio experience when you’re listening to music, watching HD movies or playing intense games through high-performance bass.
The key advantage that the Kicker 44DCWC102 brings is that the configuration is best suitable with 600 watts of recommended power and 1200 Watts peak power that buzzes while performing .It even performs brilliantly given an open air space and gives out raw power which its competitors might find hard to provide. Developed of lightweight, molded polypropylene cone, this tough subwoofer comes in ribbed polyurethane which provides you distortion free accurate audio experience.
The heavily fortified motor structure options a rip-resistant, extra-large diameter spider and extra-strength Spiralead® Tinsel leads that alter distortion free signal transfer at its best. Furthermore,the longevity of the subwoofer is empowered by the high-temp coil that’s surrounded by a vented pole piece, featuring excellent Quad Venting slots.
- sensitivity: 98.4 dB
- ported enclosure with two 10″ CompC subwoofers
- medium-density fiberboard construction covered with carpet
- 2-ohm total impedance
- power handling: 600 watts RMS (1200 watts peak power)
- frequency response: 30-500 Hz
Infinity REF1000S 10 Inch Shallow Mount Subwoofer
The Infinity REF1000S subwoofer possesses a very smooth and eye-catching outlook associated with automatic Harman-proprietary SSI which boost the impedance of the sub. The SSI, or Selectable Smart Impedance empowers you to move from 2ohm to 4 ohm in your room ambience by just pressing the switch.
As it is mentioned that great sound emerges from high quality sensitivity. The sensitivity rating of Infinity REF1000S is 89 dB which is up to your expectation, so you can expect booming bass sound in your music. The long lasting polypropylene cone aids with the best response rate.
These strong 10 inch subwoofers have a facile installation process and are highly recommended for your cat setup.
- Harman-proprietary SSI feature
- Low mounting depth
- High sensitivity rating
- Long lasting
- Hassle free setup
- Amazing sound quality
10 inch powered subwoofer home theater
Polk HTS Home Theater Subwoofer
Polk HTS has made a name for itself best known for delivering buzzing sound at an affordable price.
If you are looking for a strong home theater subwoofer Polk HTS can resemble your desire. It provides you that extra bass and enthralling beats when you are listening to your favorite songs , watching your favorite movies or playing games.
A long-throw vigorous balance 10 inch driver, patented power port technology and a 200 Watts class D amplifier has made it dynamic. Need not mention the access it gives to the users to control the volume , low pass filter, stereo line level RCA inputs.
So if you are searching for a subwoofer with strong power handling capacity, deep bass, long lasting and eye-catching design then Polk HTS is highly recommendable for you.
- Deep Bass for Home Theater and Music
- Dynamic Balance Drivers
- Patented Power Port Technology
- Deep bass for home theater
- 200 W class D amplifier
MartinLogan Dynamo 800X Subwoofer
Dynamo subwoofer Class D amplifiers can handle a peak power of 600W peak power and low power of 300 W. The high-excursion driver delivers deep bass to hunt the low frequencies to provide an amazing sound experience with pin-point accuracy.
Dynamo 800X features a Bluetooth connection developed by an advanced app-based control system (available for iOS and Android) that is usable with mobile devices. It offers an array of RCA level inputs with sturdy connection and control systems allowing you to connect with a multi-channel home theater.
Dynamo 800X can easily convert from standard down-firing to front-firing orientation, with no tools or special skills required. A grille is provided for use in front-firing applications.
- MartinLogan Dynamo 800X Hi-Res 10″ 300W Subwoofer
- Front-firing grille, rubber feet
- Power cable
- Class D amplifier
- 600 Watts peak power and 300 Watts RMS power
Definitive Technology ProSub 1000 Powered subwoofer
Definitive ProSub 1000 combines a plethora of mind-blowing features for its users to enjoy their movie or music soundtracks with deep bass.A front-mounted 10″ woofer works combinedly with a pressure-coupled low bass radiator on the bottom of the enclosure to produce deep and high-impact bass. The combined effort delivers a better speed, amazing sound, and control.
With an amplifier output of 300 watts and a frequency response of 18-150 Hz, Definitive Technology ProSub 1000 brings an enthralling sound experience for its users.
Two protection circuits ensure that the subwoofer doesn’t get overused. The hassle-free simple setup associated with front-side-mounted volume control ensures adjustments quickly and easily.
- bass-reflex (passive radiator) enclosure
- 10″ woofer pressure-coupled to a 10″ low bass radiator
- built-in 300-watt amplifier
- frequency response: 18-150 Hz
- continuously variable low-pass 40-150 Hz crossover
- auto on/off
Elac SUB1010 120 Watt 10″ Powered Subwoofer, Black, SUB1010-BK
Recorded sound can bring immense pleasure and an immersive ambiance if the bass is deep and authoritative. So when you choose powerful subs, Elac SUB1010 comes with mesmerizing features along with its amazing sound delivered by a class AB amplifier which delivers 120 watts peak/ 60 watts RMS power and the Frequency response ranges from 38hz-200hz with crossover frequency: 40hz-200hz.
A 10″ driver associated by a Low Throw dynamic woofer with L/R/LFE/speaker level inputs.
- Bass reflex enclosure
- Class AB amplifier
- 120 Watts peak power and 60 Watts RMS power
- Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
- 10” driver woofer
Best 10-inch subwoofer for deep bass
Pioneer TS-A250D4 10″ Dual 4 ohms Voice Coil Subwoofer
The Pioneer TS-A250D4 10″ is a front-line candidate in the realm of subwoofers that delivers a high-quality audio experience with international standard bass sound output. The Pioneer TS-A250D4 sub may be a 4-ohm voice coils subwoofer with fiber and mineral injected propene cone.
The TS-A250D4 provides enough power, flexibility, and rigidity for the resonance and vibrations. This then leads to additional correct remittent frequency ranges. The peak power handling capacity of 1300 Watts paves way for this 10-inch subwoofer to be an extraordinary resource in your room theater bringing you an immersive experience.
Pioneer has inputted a stacked magnet and vented pole as support to make sure that the sub can handle high power levels.
- Extraordinary bass sound
- Butyl rubber sound surround
- Smooth design
Infinity REF1000S 10 Inch Shallow Mount Subwoofer
Infinity is a renowned US-based company that has been building audio equipment for decades and has made a name for itself as reliable. The key attribute given to the design of an Infinity REF1000S is the high-gloss polypropylene cone that excels in strength and accuracy.
Furthermore, a large roll foam surround is incorporated inside the infinity for the accurate straight motion of the cone and to provide dynamic performance and longevity.
To your astonishment, it possesses a dual 4-ohm voice coil that brings elasticity in terms of wiring and it will provide a distortion-free accurate sound experience.
- Extraordinary audio quality
- Harman-proprietary SSI (Selectable Smart Impedance)
- 89dB Sensitivity
- OEM-level reliability testing
- Frequency response 35Hz – 175Hz
BIC America F12 Subwoofer
One of the most gossipped sub in the town that ensures customer satisfaction in terms of quality and price. The upper side of F12 has a facile rectangular look with the enclosure developed from MDF board with an ebony laminate. The bottom side consists of 4 rubber stands that aid in balancing the woofer. The speaker is on the front side and the back side has a port at the bottom.
It possesses a thorough volume, standard frequency ranges ranging from 25Hz – 200Hz and a sensitivity of 90 dB. This offers strong and deep bass response that brings powerful distortion free audible sounds which satisfies the customers.
- Justified crossover frequency and audio control
- Magnetic shielding provides distortion free sound
- Frequency range 25Hz – 200Hz
- sensitivity of 90 dB.
- Impedance 8 ohm
MTX Magnum Audio MB210SP Magna Bass Package
The MTX Magnum Audio MB210SP Magna Bass Package is designed to generate high-impact bass to provide you the best audio experience with its 4 ohm impedance.
The adjusted subwoofer is capable of enduring mounting pressure.. The enclosure is bonded with two 10-inch, 8-ohm woofers with poly cones and large roll rubber surrounds. The two 8-ohm woofers are wired in parallel to give a 4-ohm load at the enclosure’s speaker terminals. The twin 10″ subwoofer enclosure provides a frequency response of twenty to three hundred cycles per second.
The mono electronic equipment is rated at 250 Watts RMS at 4-ohms. The amplifier consists of 2 RCA level inputs and also a high-level input via the supplied speaker-level harness. The low-pass and high-pass crossovers are thoroughly capable of reproducing frequencies ranging from 50-250Hz. Additionally the amplifier options Associate in incorporating adjustable bass boost from zero to eighteen sound units at 40Hz.
- preamp- and speaker-level inputs
- preamp-level outputs
- 1,000 watts peak power handling capability
- thermal, overload, and short protection
- 4 ohm impedance
10-inch subwoofer with amp
Klipsch R-100SW 10″ Subwoofer, extraordinary strong bass and digitized amplifier
The Injection Molded Graphite woofer cone is the MVP of the Klipsch Reference Front Firing Driver Subwoofer, the R-110SW. The low frequency response is an output of the combination of a combination of simple material which remains highly vigorous.. This results in producing deep, clean bass. Frequency range of the Klipsch R-100 SW 10 Subwoofer is 32-120Hz.The subwoofer has a mammoth power of 300 watts of peak power to bring the best quality.
Its design is prolific in the sense that it attaches nature and technology at the same time .The textured wood touch resembles aestheticism at its best. Sound echoes from the front side of this copper spun woofer. Possess a wide range of controls e.g. line level LFE RCA inputs, low pass crossover. It delivers a dynamic power of 600 watts.
- 300 watts of peak power
- Frequency range of 32-120Hz
- Free shipping
KICKER 46HS10 Compact Powered 10-inch Subwoofer
The Hideaway HS10 is a 10-inch powered subwoofer with remarkable low-frequency punch and a durable, all-aluminum chassis. The remote control ability makes you listen to enthralling sound from a distance with the 20′ cable, with a 3.5mm mini-plug on both ends which connects the woofer to the remote.
When a woofer fails to regenerate frequencies , those frequencies cause distortions rather than rhythmic sound. To hurt more the amplifier and the woofer can even be damaged by the frequencies. The modern subsonic filter eradicates these notorious frequencies to produce an enthralling sound that pleases your ear. The 24 dB/octave subsonic filter’s crossover point is 25 Hz.
The dual position auto turn on switch gives enhanced control to the users. Harness connection with 0-6dB bass boost and 50-12Hz crossover frequency force the user to show a standing ovation to the woofer.
- auto turn-on
- frequency response: 25-120 Hz
- variable low-pass crossover (50-120 Hz)
- warranty: 1 year
Garmin MS-SW10 Fusion Entertainment 10-Inch 400W Marine-Grade Subwoofer
This Garmin MS-SW10 ensembles a marine subwoofer inside your sound system which enhances the bass level of the audio thus providing best audio quality.
It’s specially developed for the marine ambience and a standard attachment to your FUSION marine sound system .
The MS-SW10 and its water resistant design bonds with ASTM standards for UV stability and Salt/Fog resistance, which ensures its longevity and high performance.
With 400-Watts Peak output, the MS-SW10 produces highly accurate bass and distortion free sound.
- 400 w peak power
- Magnet structure – 60 oz
- 2″ voice coil – 4 ohms – 30hz-2.0Khz – 88Db
- ASTM standards for UV stability
The above descriptions of subwoofers pave an easy path for you to choose the best subwoofers amongst a plethora available in the marketplace. The subwoofers described above bring quality foremost and abundant other features that make your sound experience amazing and enchanting.
There are hundreds of options available but obviously, the choice is yours. We have discussed the pros and cons of subwoofers in terms of criteria and affordability so that you have hassle-free buying options. All these options are buzzing in the marketplace in their respective categories but if you ask for recommendations then I would suggest Pioneer Elite SW-E10 in terms of powerful audio experience, Acoustic Audio PSW-10 , Rockford Fosgate R2D2-10 in terms of affordability and audio experience. Finally, for the best bass experience, you can try Pioneer TS-A250D4 10
How is a subwoofer designed?
Ans: Talking about a subwoofer’s design, generally, it is a wooden or plastic loudspeaker enclosure that is associated with one or more woofers. The design itself makes life easier for a subwoofer and aids in performing the best for its users. The design includes bass reflex, horn-loaded, bandpass, and infinite baffle subwoofers.
How does a subwoofer operate?
Ans: A woofer generally transforms electrical signals to sound. The method elucidates that an electric signal and its variations enable the instrument’s motion and initiate sound waves into water or air.
Woofers usually operate in a range between 20 to 2 kHz, making them play low to mid-range frequencies. Because they have a wider range of sounds, woofers are perfect for use in home theaters.
Can a woofer be used as a subwoofer?
Ans: To give a simple answer I would say “YES” but keep in mind that in this case, you would call it a woofer and when an amplifier is connected with the same installed driver it turns into a subwoofer because it consists of an LFE. Drivers that are classified as subwoofers are often designed for lower frequencies than the range of typical woofers.
What makes a speaker a subwoofer?
Ans. Subwoofers are made up of one or more woofers mounted in a loudspeaker enclosure—often made of wood—capable of withstanding air pressure while resisting deformation. … Passive subwoofers have a subwoofer driver and enclosure and they are powered by an external amplifier. Active subwoofers include a built-in amplifier.
Which is better: Woofer or subwoofer?
Ans. Subwoofers mainly reproduce the low-frequency sound and result in providing a more realistic and engrossing sound. Woofers can be accurate for a portable system, for instance, car sound systems.
What is the difference between Kicker Comp C and Comp R?
Ans. The Comp R has two brass voice coils in every single model. The CompVR also features a dual voice coil design, but the Comp C gives you the choice between single and dual voice coil options. The Comp C’s variety gives you a lot of options when it comes to finding the right subwoofer to match your sound system.
What ohm is best for subwoofers?
Ans: 4-ohm subwoofers will have a higher impedance, consume less energy, and therefore possess longevity than subwoofers with lower impedance.