Hisense Roku TV Keeps Restarting

Even though a cheaper Smart TV brand like Hisense is cheaper than many of the expensive brands, it does have some problems. Many users get cut off in the middle of watching their favorite shows. So, if your Hisense TV keeps turning on and off, what can you do?

You’re right to be frustrated with your Hisense TV’s incessant restarting. But you don’t have to deal with this problem forever. There is a way out, and you should be able to watch your favorite shows in their entirety again in no time. Read on to find out what to do if your Hisense TV keeps turning on and off.

Why Does My Hisense TV Keep Restarting?

Some TV viewers have said that the show they were watching started over on its own. This is often caused by a loose cord or an update that needs to be done. When the smart TV is turned on, sometimes the logo comes on, but then it turns off or goes back to the home screen when streaming services like Netflix or HBO Max are being used. There have been reports from some customers that the gadget won’t switch on, but the red light is still on.

If you’re still having problems, check your Hisense TV for physical or obvious damage and get in touch with Hisense to see if you might need a replacement.

Read: Why Can’t I Download Apps on My Samsung TV

Fixing Hisense Roku TV Keeps Restarting

There are a number of things you can try if your HiSense Android or Roku TV keeps restarting.

Reset The Hisense TV

As was said above, try restarting your device. If the problem still happens after you restart your device, you need to try a factory reset. Resetting your TV is a quick and easy way to get out of the reboot loop.

Keep in mind that this will erase any information you have saved and return the device to its original settings. Next, make sure you have a strong connection to the internet. Problems with your Internet connection can cause your device to slow down or not work as it should.

You have two options;

Method 1

  • To begin, remove the wall plug from your Hisense TV.
  • Let’s wait 10 minutes. Now, hold down the TV’s power button as you plug in the power switchback.
  • When the TV turns on, let go of the button.

Method 2

Your Hisense TV has a button that says “Reset.” If you press this button, you can fix a number of problems. You can force a restart of your Hisense TV if it is trapped in a restart loop. Here’s how it works;

  • Find the button that says “reset” on the back of your Hisense TV. It is on the left side of the back of the Roku TV. On other models, it might be in a different place.
  • While doing this, make sure that your Hisense TV is turned on. This is a very small hole. To press it, you will need a toothpick, pen, or something else with a point. Sharp things can hurt your TV, so don’t use them.
  • Put the pen’s point inside the hole. Hold it down for a few seconds. Your Hisense TV will power off and then power back on. Let go of the button.
  • It will go dark for a brief period of time, then reappear. Use this procedure if your Hisense TV is trapped in a reboot loop.

Read: Home Theater Wiring Tips

Update Your Firmware

You can’t get the software on your Hisense TV because it’s stuck. Because it doesn’t do what you tell it to. But there is another way to install the software.

  • You can get the latest software for your Hisense TV on your PC or laptop.
  • Then, move the file to a USB flash drive.
  • Now, turn off your Hisense TV and plug the USB stick into it.
  • After that, turn on your TV and it will scan the hard disk to locate the most recent software version.
  • If you finish the steps, your TV will stop restarting over and over again.

Read: What Need to Know About DTS Sound

Put everything back together

Your Hisense TV might be stuck in a restart loop because of a connection. So, you should think about this answer.

Remove your TV from the Wi-Fi network. You can do this by restarting your Wi-Fi router, which will cause it to stop connecting to your TV.

Also, unplug any HDMI cables, flash drives, streaming sticks, cable or satellite boxes, or other devices that are connected. Plug them back in after a while. A Hisense TV that won’t turn on may be fixed using this method.

Read: Equalizer Settings for Clear Voice on TV

Hardware Flaws

The problem with the restart loop could be caused by a broken backlight. It’s very simple to check. Just take the power board off of the main board.

Plug in your TV’s power wire now. Your television’s backlight will come on and it will function correctly again. Still, if the backlight doesn’t come on, it doesn’t function. If other parts, like the T-Con board or the power board, are broken, this problem can also happen. To find out who did it, you should talk to a TV mechanic.

If your Hisense TV is still under warranty, you should talk to the company that made it.

Conclusion

You can fix a Hisense TV that is stuck at constant restarting at home. This article gave you all the best ways to do things that work. If there is a problem with the hardware, you can fix it by using the tricks above.

Talk to an expert if the hardware is malfunctioning. Simply because the TV hardware is complicated to comprehend, and you have no idea how it works. To fix it, you might hurt it by accident.

FAQs

This FAQ is here to solve some of your problems regarding Hisense Roku tv.

Why does my Hisense Roku TV keep shutting off?

Your Hisense TV could blink for a little over a number of reasons, such as a problem with the system or with connecting to the internet. The first thing you should do to fix this problem is restart your device. Turn off the device, wait 30 to 60 seconds, and then turn it back on.

How do I stop my Roku from turning off?

Thank you for posting. Most likely, your Roku device’s Bandwidth Saver Feature is causing the inactivity timeout you’re seeing. Go to Settings > Network > Bandwidth saver > Off to turn this on or off.

Why does my Roku keep cutting out?

Most of the time, this is because the audio format(s) you’re attempting to play aren’t compatible with the audio format(s) your attached gear can handle. If this happens, try the same steps for HDMI devices as above, and if you’re using a TOSLink optical cable, set both HDMI and S/PDIF to PCM-Stereo.