How to Hide Speaker Wire

0
35

In today’s society, if you want to make your home theater look good or just set up your computer with PC speakers, you have to deal with the wires. There are a lot of wires all over the place, which makes it hard to keep things looking good and match them to your own tastes. At the very least, you should hide those wires.

To get the look you want, how far are you willing to go to get it? What are you willing to spend?

There are many ways to solve this problem. I’ll go over them in this article.

Precautions

Before we begin to hide the Speaker Wires, make sure that all of your cables are removed and ready to be reconfigured.

Make sure you have all the tools you’ll need for your little DIY cleaning projects, like wire strippers, a tape measure, ruler, pliers, a utility knife, drills, and any other tools you think are important.

If you reside in a leased house, be sure to get permission from your landlord before beginning any drilling into your walls.

Best Ways to Hide Speaker Wire and Audio Cables

Some ideas for hiding speaker wires are shown here

Use existing room décor

If you want to hide the speaker wires on a budget, you can use what you already have. In a room with posters or other art on the walls, you can run speaker wires behind them to surround speakers that are behind them. Some of the wires can be hidden with things like curtains, plant pots, and decorations.

The best way to move your home decor is to fit your TV-Speaker connections behind your TV stand, or place your wall-mounted stand so that it covers the path from your speaker wires to the nearest power outlet. This will not hide them completely, but it is a simple and effective way to get rid of them.

Run the speaker wires above your ceiling

If you have a suspended ceiling or haven’t yet constructed a drywall ceiling, this choice is very convenient. In a home theater, speaker wire can be run through the ceiling joists or suspended from a cable tray that can be bought at a hardware store. In order to match the wall color of your speakers, you may paint the wires that connect them.

Tuck Speaker Wire between Carpet and Baseboard

There are likely baseboards in your home if you have carpet. To make room for carpeting, baseboards are often installed a little off the ground. Under the carpet and the baseboard, there should also be space for a tack strip to be able to move. This is a great place to run speaker wire around and between rooms.

If you have a piece of wire, try to slip it between the rug and the baseboard with your hands. If the space is tight, use a small screwdriver as well as ruler to gently push the wire toward the wall until it shows no more.

If everything goes as planned, measure and lay out enough cabling so that the speakers can get to the stereo. Keep the wires out of sight before you connect them to the terminals.

As long as this method is simple for most people, some people might have trouble getting the wires in between the carpet and the baseboard.

Use a pair of pliers to pull up a piece of carpet slowly from one end. You should be able to see all the wood flooring, the tack strip, and the gap between the wall as well as the tack strip. The tack strip is sharp, so be careful (underneath the baseboard). When you slide the speaker wire into the hole, push the carpet edge down on the tack strip.

You should keep making your way around until all the speaker wire you want to hide is hidden.

Speaker Wire Tape

If you don’t want to cut holes in walls or run wires through walls, then just a flat speaker wire tape seems to be the best way to hide your wires. It looks like ribbon and can be used in the same way that packaging tape does.

It opens up when you remove the tape’s backing. This side of the tape is strong enough to stick to almost anything. This sticky side can be used on any flat surface.

Because wires are very flexible and thin, folks can use the tape to wrap the wire around it completely, even in the corner. You can even paint the outside of the tape so that it matches the color of the baseboard or wall it is next to.

The most common type of speaker wire is 16 gauge and has either two or four conductors. For people who want to cover two-amp speaker wires, the four-conductor option is the best choice for you.

You also need to buy terminal blocks with two pairs of wires for each speaker if you use these wires. Connect the flat copper wire on the opposite side of each terminal block, while the other end is clipped to the rear of the speaker’s standard speaker cord.

Use Cable clips

If you want to attach speaker cables to the baseboards in your room, you can also use cable clips with built-in nails to do it. These are cheap and very easy to use and set up. When it comes to cable clips, most of them come with self-adhesive, which is great.

To put the clips in place, you don’t have to drill them into the wall. This makes them very useful if you rent a home.

It’s easy to overlook cable clips because of their modest size, and you may use whatever many you like. If you want to buy ones that can be nailed to the wall, this is also possible and is the best way to keep them there for a long time.

Remove the clips and make sure the self-adhesive doesn’t peel off the paint on the walls when you do. It’s also not completely hidden in this case, although they are completely out of the way.

Cable Organizers and Cable Concealers

While there are many ways to hide surround sound speaker cables, few of them work as well as cable organizers and concealers do. Such tools are easy to use and hide the wire so it doesn’t look awkward.

Because these products are also cheap, they are both a good deal. That kind of means that you don’t have to spend loads of money or time to hide all of your speaker wires. Many options, like corner ducts, come with extras like pre-applied adhesive backing, within and without corners, tee reducers, and fittings. These things can help you make your wire management look the way you want it to.

Use Guide Systems

A guide system is like a cable holder in that it doesn’t hide the cords. Use them to make a trail for cables or wires on the wall or floor. They are outside tools, like cable clamps, that you can use to make the trail.

It’s good for people who have a lot of thick wires which will be hard to hide with the other tricks. The cable guide systems are beneficial to them. You won’t be able to have a wire-free space with guide systems, but they will make your floor cleaner.

Make the best use of your Doorways

In general, there are some things that you can do with a doorway, like: In some cases, you might have wires that are just in the way of a doorway or are going to another room. You can use wire covers or runners to hide the wires.

Even so, there is another way to use doorways. If you want, you can also hide wires around the doorway by running them through the door frame. This will take a few steps. You should keep in mind that this is going to be a more difficult process as well.

Remove the molding or trim because it is at the top of the door and throw it away. Take the nails out as well.

Small holes should be made in the wall just behind the trim. The holes should be big enough for your wire to fit through. An electric saw can be used for this.

There should be a hole in the wall near the top of the door frame. Find this hole and feed a long string or chain through it. Then, run the string or chain behind the wall to the open baseboard underneath the door.

Chain or a strong string can then be used for the next step. You can then use this to feed the cord through a door frame and down to the other side.

Keep the wire in place behind the baseboard by running it through a wire raceway or runner, like this one.

In this step, put back all the trim or baseboard you took down earlier, making sure to put everything back where you took it down.

Corner Duct Raceways

In most circumstances, speaker wire tape is a good choice, but some people prefer something else. The corner duct cable raceway is a cheaper alternative to wire tape. It can be used for industrial, commercial, and residential projects to store and hide cables in the corner of the living room or cables that operate from the ceiling to the floor.

These duct raceways are good at keeping cables as well as speaker wires neat and safe from damage. This not only hides the ugly speaker wire, but it can also fit most types of cables or power cords.

Most of these concealers come in a unique three-sided design. These tools also come with a pre-applied adhesive backing which will help you when you’re putting them together. But nevertheless, you may need more screws or glue for some projects.

Using the triangle-shaped ducts, you can connect them to right-angle walls. The third hypotenuse side mostly has a snap-on cover that makes it easier to put in the duct. Because of its simple design and ease of use, the raceway is ideal for quick cable upkeep and allows you to avoid any internal damage to the wall when you remove cable from a corner duct.

Finally, you can paint these to match your wall.

Use Flat Adhesive Speaker Wire

If you don’t want to cut holes in the walls or run wires through the walls, flat speaker wire could be the way to go. If you want to make a wire that looks and moves like ribbon or packaging tape, you can use Sewell’s Ghost Wire. When you peel off the backing, you can see the advanced manufacturing adhesive side, which can stick to almost any flat surface.

Because this wire is versatile and very thin, you won’t have any trouble going around corners. If you want to match the wall or baseboard color, you can paint the side that is visible to the outside world.

Flat speaker wire is usually made of 16-gauge wire with two or four conductors. This wire is best for people who want to bi-wire or bi-amp their speakers, because it can be used for both. When you use this kind of cord, you’ll really need some flat wire terminal blocks to connect the wires (one pair for each speaker). There are two terminal blocks on each side. One side of each one clips to the flat copper wire, and the other side clips to the regular cable for speakers. Then, carefully measure and put in the flat speaker wire. After which, you can paint.

Snake Through Walls and Ceiling

It will take some time if you want to put in-wall or ceiling speakers in your home. Make sure you think about whether in-wall or in-ceiling speakers are better for your home before you start.

If you don’t think you do that kind of project on your own, you might want to hire a contractor. It takes a lot of planning to setup in-wall and in-ceiling sound systems because there are a lot of things to think about. But what did happen? It will not only be impossible to see the speaker wires, but you might also have your speakers flush as well as hidden in walls.

As long as you don’t have or plan to use speakers that are built into the walls or ceilings, you can still run speaker wires through walls and ceilings. Some times, it’s easier to cut small holes in the walls, particularly if your stereo receiver can control speakers in several rooms.

If you want your wires to look clean and classy, are using speaker wall plates. These plates look like power outlet covers, but they have binding posts or spring clip terminals for several sets of speakers. Some even have HDMI ports, which are great for home theater systems.

Take advantage of light strips

If you like pretty lights more than painting, cover the speaker wires with flexible LED light strips. They come in different lengths, lumens (brightness), temperatures, output colors and materials. LED light strips also have a lot of different options. AC wall adapters can be used to charge some of them, while USB power can be used for others. All but a few come with remotes, and some of them can be controlled with a smartphone app.

With all these kinds of lights on the walls, you could indeed run speaker wires along them and no one will know.

You should please remember that many light strips are LEDs with a peel-away backing which lets them stick to things. Hook the hooks to the wall where you want them, hang the speaker wire behind or under the LED light strips, plug everything in, and afterwards enjoy the atmosphere!

Camouflage With Paint

If you have wall-mounted speakers, like a multi-channel surround system, you should expect wire to run up the walls. You can hide wires between carpets and base boards, but if you don’t have the option of doing that, wires from any speaker may still have to run horizontally along walls. Paint these cords so they don’t stand out as much.

Check first if you’re not sure if you can use a staple gun when you rent a place and you can use nails to hang things. Among other things, you’ll need a lot of staples, twist or zip ties (twist are better because you can remove them at any time), paint brushes, and paint to match your walls.

Make sure the speaker wires are straight and flush with the walls prior to actually painting them. But instead of using a staple gun to pin wires, staple the twist/zip ties together with a staple gun instead. A tie should be hung wherever you want the speaker cord to be before you staple the tie across the middle. After which, place the wire just above staple and tie the tie. This is how it should look. Putting the speaker wire together with a staple doesn’t cause any damage because you’re not.

Every few feet, do this. Trim extra tie lengths with such a pair of scissors to make the tie fit better. When you’re done, paint the wires as well as ties in the same color as the walls to hide them. For example, if you need to move or remove wires, there are only small staple holes left behind. This is the best thing about this method.

Hide Speaker Wire Behind Your Baseboard

This is, of course, one of the more complicated options. In general, it’s not the best thing for most people. However, if you’re good with your hands, you could go this way. To do this:

First, you need to cut the paint seal where the wall meets the molding with either a utility knife or a razor, so you can remove the molding.

Take down the base moldings next. This is where you’ll be running the speaker wire on your wall. Starting at the first stud of molding is the best way to get the molding off. Keep shaking one stop of the pry bar in between the drywall and the molding. Then, you have to be very careful when you pull back to remove the molding from the wall. Continue to do this for each stud until all of your molding is gone. To keep the molding from blemishing or cracking, be very gentle when you do it.

It’s time to put the molding in a place where it won’t get damaged. It would be smart to keep them in order, so you can put them in the same place they were before. You might want to write the number on the back just in case.

Now you have two options.

You can look for the part of the floor that meets the wall. Between the wall and the edges of planks, hardwood flooring usually has a little extra space. This gives the flooring space when it grows. Run the wire through this space and cover it with molding if that’s what you want to do.

Yet, there is always the chance that your wood will expand and damage your speaker wire at some point in the future. I don’t think it’s very likely, though.

As another option, you can also run the wire through a hole you make in the wall behind the molding. There is also a lot of molding you can buy that has channels on the back, so you can run your wires through them.

The next step is to hide your speaker wire. After you figure out where to hide it, carefully run the wire through your channel.

Finally, you’ll need to put the molding back in place very carefully. You should try to put each strip of molding in the same place it was before to make sure everything fits together.

Explore other panel molding options. At about mid-height, chair-rail molding can be used to hide speaker cables. It can also be used to make the walls look nicer.

Consider Chair Rail Molding

Most people know about crown molding, which are the interior pieces that match the ceiling and the wall. The molding that goes across the middle of the walls is called Chair Rail Molding or wainscotting. People often paint the walls so that the color above the chair rail is different from the color below.

Many types of chair rail molding have a design that makes speaker wires to be tucked away under the molding. This makes living spaces look more modern and cleaner.

To install chair rail molding, you will need a lot of thought and planning. Measure the walls to figure out how much molding to buy. To make sure the chair rails stay in place, you need to find the studs first. Pieces need to be cut very carefully so that all the ends connect with each other in the same way. Also, there are things to do like sand, finish, and paint the house, too. The speaker wires should be run through in a safe way if they need to.

Go Wireless (when possible)

You can get rid of some cables by going wireless. You can go wireless if you want to hide speaker wire. This is a fantastic way to do it because there are no wires at all. These things can be used to make this happen. Speakers, keyboards, mice, and other things of that kind can be used. You’ll only need Bluetooth or Wi-Fi-enabled ones that can send signals from your computer or mobile device without wanting to stay plugged in, like when you use an HDMI or optical cable to connect your computer or device.

These usually cost a little more than other surround sound speakers. In other words: They might be good to think about. They have a lot of connections, but they will need to be charged often to stay connected.

Final Thoughts

We hope that this article has been helpful to you, and we thank you for reading it. This is why it is important to hide the speaker wires that are a part of every audio system. There are many ways to do this. Some are simple and cheap, while others are hard and expensive.

Even though, if you want to put the wires into the walls, we’d rather you hire a pro. Most of the time, these options aren’t too pricey, and they do a good job of keeping the wires neat and hidden. And in the end, you will have a clean and tidy room that lets you focus on what’s important, which is great sound!

Frequently Asked Questions

How do you hide speaker wire in drywall?

There is a way to hide speaker wires in drywall. You can drill holes through the drywall, and then the studs, to get them through. They can then be recovered through the wall where you want to connect them.

How do you hide speaker wire on hardwood floors?

When you have hardwood floors, there are two options: You can either use rugs or flat adhesive wires and paint wood texture over them, or you can use raceways that look like wood.

What gauge is speaker wire?

As a general rule, a speaker cable is 12 to 16 gauge for long connections, and 18 gauge is the standard for short connections.

Is flat speaker wire good?

They are more flexible and low-profile than round cables, making them easier for installers to work with, especially if you want to run your cables through the wall or under the carpet.