You have bought a Sony soundbar so that you can enjoy the deep range bass as well as surround sound. However, you can’t find the remote, which results in mixed and bad settings. Yet, there’s nothing to worry about. Even if you lose your Sony soundbar’s remote and it doesn’t have a power button on it, you can turn it on and still use it.
Here, I tried to write down all of the ways you can turn on your Sony soundbar without having to use a remote.
Turning on a Sony Soundbar Without a Remote
In some cases, you’ll need to use the remote control to get the most out of your Sony soundbar.
So, if you lose the remote, you won’t be able to do some things until you get another. But that doesn’t have to happen. The best way to use your Sony Soundbar without a remote is to connect it to your TV.
It will work with your TV once you get it set up. Then, you only need your TV remote to control both the TV and the soundbar.
There isn’t much to worry about if you lose the remote or if the power button on the soundbar doesn’t work for some reason. The TV can control it if you have already synced it before the remote control is gone, so you can control it that way.
Method 1: Power Switch on Soundbar
The first thing you need to check is whether the soundbar has a power switch button. It is usually in the bottom right-hand corner of the sound bar.
The manual can help you figure out which button to use if there are a lot of different ones. In most cases, the power button is embossed, and it looks like this icon.
Try pressing all the buttons on the soundbar one by one if there are more than one in the bottom right corner and you don’t have the manual. You’ll see LED lights blink if you press the power button.
As soon as you find the power button, press and hold it until the LED light turns on.
Method 2: Connect to TV
To turn on the sound bar, connect and sync the sound bar to your TV. An optical cable or an HDMI cable can help you connect the two. Then, turn on the TV and enjoy your show. Go to the TV setting and choose CEC and turn on HDMI. A TV remote will be able to do all of this.
If that doesn’t work, here is another way to connect the soundbar to the TV and use the TV’s remote to control it.
To avoid any problems, ensure sure the devices are properly connected to the TV before to turning it on. When you turn the TV on, go to the settings and turn it on. Select the Sony soundbar as the sound source and close the settings. This will enable you to use the TV remote to control the soundbar’s volume and other functions.
Method 3: Sony Soundbar Control App
If you have a smartphone, you can turn your Soundbar on or off, without the remote.
For Android users, you will go to the Google app store and look for the Soundbar remote app there. To use this app, you need to install it on your Android phone and turn on the sound.
If you have an iPhone, you need to go to the Apple App store and look for your Soundbar remote app. Then, download and install it. It’s then that you can turn on your Soundbar through your iPhone, and you can do that.
As soon as you don’t find your Soundbar remote app there, you need to get the universal Soundbar remote app instead. The universal soundbar remote app will most likely solve your problem, and you can use your smartphone or iPhone as the soundbar remote to control your soundbar. You can not only turn on or off your Soundbar with the help of that app, but you can also change the volume of your soundbar with the help of that app.
Method 4: Universal Remote Control
You can buy a universal remote if the other methods don’t work for your sound bar.
In the same way that the remote-control app works, a universal remote does the same thing. The infrared signal from the universal remote to the Sony soundbar goes through the universal remote and back again. It is important to remember that the closer the two devices are to each other, the better they work together.
Universal remotes can be bought at your local electronics store for less money, but if you want the best performance, you should buy a substitute universal remote from a Sony dealer.
Remote not working
You can also buy a universal remote if the other methods don’t work.
A universal remote works in the same way as the remote-control app. The infrared signal from the universal remote to the Sony soundbar travels through the universal remote and back to the Sony soundbar. Because the two devices are close together, they can connect better. This is important to keep in mind!
It is better to buy a new universal remote from a Sony dealer than from a store that sells them.
Contact Sony Support
Call Sony support if you still don’t understand what’s going on and they’ll help you figure it out. These people can help you find better options based on the model of your soundbar.
To turn on your Sony soundbar, you don’t need to use your remote at all! In at least one of these ways, you’ll be happy.
If you don’t have the remote to turn on the Sony soundbar, these are good ways to do so. Sony support should be called if all of this doesn’t work. The problem may be more than just a lost remote control, and it may need to be fixed.
If you just lost the remote control for your soundbar, then these steps from our experts will help you get it back.
Frequently Asked Questions
How do I turn on my soundbar?
The first thing you’ll do is connect your soundbar to an electricity source. This will make your soundbar start up. The power button on the soundbar or the soundbar remote control can be used to turn it on if it’s still not turned on. Your soundbar will start up, so you can connect it to any of your devices and watch your favorite TV show, music, or movie.
Can I control my Soundbar with my TV remote?
If you have a Sony soundbar and a Sony TV, it might work if you use the same brand. Mostly, it doesn’t work. In this case, when you lower the volume on your TV, your soundbar will automatically lower its volume as well. This is because your soundbar gives you the sounds from your TV.
Can I control my Soundbar with my phone?
It’s true that you can use your phone to control your sound bar. In order to do this, you will need to download the soundbar remote control app to your phone and then use it. It can see in the dark. The most advanced Android phones have infrared. If you have an old Android phone, it won’t work.