The Klipsch speakers, like all excellent speakers, blend design and functionality. Klipsch is known for producing high-end speakers emphasising audio quality and innovative features. It’s a well-deserved reputation, as our chosen collection demonstrates.
In this study, we’ll compare Klipsch’s R-820F and RP-8000F passive floor-standing speakers. Before our more extensive comparison, let’s look at the major features of the Klipsch R-820F and Klipsch RP-8000F.
The RP-8000F: Delivering Cinematic Sound
The RP-8000F floor-standing speaker from Klipsch uses its patented Tractrix® horn packing tech to direct high-frequency energy directly at the audience and eliminate undesirable, artificial reverberation brought on by indirect audio bouncing off walls, giving you the most accurate, detailed, and lifelike sound possible.
In order to reproduce high frequencies more smoothly, a vented tweeter design lowers standing waves behind the tweeter diaphragm.
The lightweight, robust design of the titanium tweeter diaphragm outperforms that of silk, polymer, or aluminium tweeters.
The piston motion of the titanium diaphragm used in Klipsch’s award-winning Linear Travel Suspension tech reduces distortion and produces true-to-life sound.
The RP-8000F floor-standing speaker’s distinguishing feature for sound and appearance is Klipsch Proprietary CerametallicTM woofers. These stiff, very light materials can efficiently transmit lower frequencies while maintaining their structure.
Klipsch CerametallicTM cones are bonded to dual-layer, copper-wound coils for outstanding conductivity.
Reference Premiere woofers are fitted with our horn-loaded tweeters for the best acoustic performance. They are contained in a non-resonating, marked basket fastened to a big magnet motor for great efficiency and minimal distortion.
TRACTRIX® PORT + DUAL TERMINALS
Even at the lowest frequencies, the rear Tractrix port produces optimal airflow with little distortion or turbulence since it is properly-suited to the cabinet and woofers.
For a personalised, high level of experience, you may bi-wire or bi-amp your speakers using the twin input terminals on the RP-8000F floor-standing speaker.
FINISHED TO PERFECTION
The satin-painted baffles on the RP-8000F’s ebony and walnut finishes have a scratch-resistant design. Compared to MDF or ABS plastic, the cast aluminium feet offer a contemporary aesthetic with less resonance. The speaker is mechanically decoupled to have the least amount of surface area in touch with the floor, allowing for quicker, more focused low frequencies and more clarity.
R-820f: A hallmark of Klipsch speakers
Your music and movies will have more strength and passion thanks to an upgraded horn design with larger outer horn dimensions. With directivity control across a wider frequency range and a more precise sound staging, bigger is unquestionably better.
LINEAR TRAVEL SUSPENSION (LTS) ALUMINUM TWEETER
Klipsch speakers are known for their special 1 “LTS with a Kapton Suspension tweeter that reduces distortion for more precise performances. To ensure great efficiency, aluminium, which is incredibly light and robust, is utilised in tweeter construction.
SPUN-COPPER THERMOFORMED CRYSTALLINE POLYMER WOOFERS
The 8 Reference Premiere speakers from Klipsch draw on tech from their popular Reference Premiere line “TCP woofers have steeper cone angling for smoother response, more accuracy, and better transparency.
REAR TRACTRIX PORT
Even at the low-frequency range, the rear Tractrix port produces optimal airflow with little distortion or turbulence since it is properly suited to the cabinet and woofers.
HIGH-QUALITY CABINET DESIGN & APPEARANCE
The speakers have a sleek, contemporary design thanks to the edge-to-edge horn, low-profile magnetic grilles, and concealed fasteners. MDF cabinets with a patterned, scratch-resistant wood look to match your home’s decor.
REFINED ATMOS CONNECTIONS
With the straight and discreet connectors positioned on the back of the speakers, upgrading to Dolby Atmos is simple. These more precise connections minimise the visible cable and keep it in place for improved wire management.
Ready to have your world shaken by listening to every speaker in the acclaimed Klipsch Reference line’s most recent iteration!
R-820F versus RP-8000F: A Comparison
The Klipsch RP-8000F and Klipsch RP-6000F are two floor-standing speakers that add to your home theatre experience or music listening enjoyment. In the following sections, we’ll go over the details of how the Klipsch R-820F and Klipsch RP-8000F compare to provide enough evidence to help you determine which of these loudspeakers is the best choice for you.
Both the R-820F and the RP-8000F are two-way models. A 1″ tweeter and 2 x 8″ Copper-spun IMG Woofer are included in the R-820F. The RP-8000F, on the other hand, has a 1″ Tractrix Horn Tweeter and 2 x 8″ Cerametallic Woofer.
The frequency range of the R-820F is 35-21k Hz, whereas the frequency range of the RP-8000F is 32-25k Hz. The R-820F’s minimum frequency of 35Hz is somewhat higher than the RP-8000F’s minimum frequency of 32Hz.
Impedance and Sensitivity
The Impedance of the R-820F and the RP-8000F is 8 ohms, although the sensitivity levels differ. The R-820F has a sensitivity of 97 dB, whereas the RP-8000F has a sensitivity of 98 dB. Klipsch RP-8000F is a more sensitive speaker than Klipsch R-820F, allowing it to play louder with the same amount of watts.
R-820F and RP-8000F have the same power range of up to 150 watts.
Both speakers contain a parts Warranty of 5 Years from the manufacturer and another five(5) years labour warranty.
Input Type and Bi-Amping / Bi-Wiring
Bi-amping or bi-wiring is possible with the RP-8000F’s Post posts. The R-820F has a Post that lacks bi-amping/bi-wiring.
Due to space restrictions or, in certain situations, merely aesthetic considerations, the size of a speaker might become an essential choice element. In this section, we will compare the exterior dimensions of the Klipsch R-820F and Klipsch RP-8000F. The external dimensions of the Klipsch R-820F are 1096.0 x 277.0 x 426.0mm (43-1/8 x 10-7/8 x 16-3/4inch), whereas the external dimensions of the Klipsch RP-8000F are 1099.0 x 277.0 x 445.0mm (43-1/4 x 10-7/8 x 17-1/2inch).
Choosing the best speaker (Buying Guide)
Floorstanding Speaker Sound Quality
It might be tough to find floor-standing speakers. They’re big and hefty, and while there are some inexpensive versions, they’re more expensive than most other speaker varieties. So, what makes you want to go for them?
The solution is straightforward: sound quality. Floor-standing speakers are the most common type of speaker in the world. They may not only grow louder and more powerful than other speakers due to their enormous size and enhanced drivers.
Floorstanding Speaker Size
We’ve previously addressed size, and there’s a reason for it. Floorstanding speakers aren’t designed to be lightweight or portable. If you buy one, you probably won’t be bringing it camping with you – but if you do, please send us images because that’s fantastic.
As a result, manufacturers are not required to limit the size and weight of their speakers. This gives them a lot of areas to work with, which translates to higher levels. If you have a small or medium-sized space (under 250 square feet), you can get away with fewer speakers while still getting enough loudness. If you have a larger space, the possibilities are practically endless.
Two-Way vs Three-Way Floorstanding Speakers
All sound is made up of many frequencies. In terms of audio, such frequencies are divided into three categories: low-end (bass), mids (where components like voices are found), and highs (think snares and violins).
While a single speaker driver can handle them without issue, sound quality increases considerably when two or more drivers share the load. One driver can concentrate on the lows and mids, while the highs are delegated to a separate driver. The former is referred to as a woofer, whereas the latter is referred to as a tweeter.
Cabinets and Vibration
The volume of floor-standing speakers may be rather high. They’re also moving a lot of air around since sound only occurs when air moves. That means the cabinet – the speaker’s exterior casing – is extremely crucial. If it’s too fragile or badly constructed, it’ll rattle loudly, which you don’t want. But how can you know you’re choosing a speaker who won’t do this?
The good news is that you are unlikely to be required to do so. Even inexpensive loudspeakers now have sturdy enough cabinets to resist vibrations at all but the highest levels, thanks to speaker design and materials advances. Even at budget-friendly pricing ranges, materials like reinforced MDF and technologies like internal baffles, resonance chambers, and acoustic tuning have become commonplace.
Volume and Sensitivity
We’ll point you toward sensitivity if you want an objective way to tell whether a particular speaker can get loud. Sensitivity measures how many decibels a speaker can put out at a given power level (usually one milliwatt). The higher the number, the louder the speaker will be.
Anything above 90 dB has a lot of loudness. The Klipsch RP-8000F speakers, which cost a little under $1,400, have a dB rating of 98. As you can expect, greater sensitivity means a higher price. If you want a floor-standing speaker but don’t plan on increasing the volume, a speaker with a lesser sensitivity will save you money.
Matching Speakers With Amps
Amplifiers are required to power floor-standing speakers. Because they produce such high levels, they may be extremely demanding regarding the amount of power their amplifiers require. The good news is that matching a speaker with an amplifier capable of providing appropriate power is rather simple. Every speaker has a recommended amplifier range, which is expressed in watts. The Fluance Signature Series, for example, requires an amplifier capable of delivering between 20 and 300 watts.
Bi-Amping and Bi-Wiring
Let’s imagine you have some extra cash and want to improve the sound quality of your speakers even further. Instead of the customary one, look for speakers with two pairs of binding posts on the rear. The speaker’s two sets of binding posts allow for bi-amping and bi-wiring, and if you’re willing to get your hands dirty and invest a little money, you can achieve some amazing results.
Home Theater vs Hi-Fi
Floor-standing speakers, despite their size, are incredibly adaptable. Whether you’re building a hi-fi or home theatre system, you can be assured that the speakers will be up to the task. They’ll feel as at ease performing music as they would in a surround sound system.
Floorstanding Speakers vs Bookshelf Speakers
Bookshelf speakers are smaller, lighter, and easier to power. Then their floor-standing counterparts. As a result, they are often confined to two-way configurations and do not produce the same volumes (see above for more info on this). This isn’t to say they’re bad; far from it. They can sound just as nice as huge floor-standing speakers.
This FAQ is here to solve some of your problems regarding these speakers.
Is Klipsch RP superior to R?
The Klipsch R series is recognised for its extreme brightness and, at higher volumes, can seem slightly harsh. The RP series sounds considerably smoother, has more detail clarity, and is a better speaker overall. If you’re set on Klipsch, the smaller RP-150 would be worth considering in terms of price/performance.
Klipsch Reference speakers require how many watts?
I hope this information is useful. A: 150W per channel into 8 ohms is suggested for these speakers. To run them without harm, you’ll need a minimum of 120W per channel into 8 ohms.
Is it true that more watts equal greater sound?
Yes, the more power (watts) the speakers have, the louder and clearer they will sound. On the other hand, small power changes don’t produce much of an audible difference. To hear a different speaker would double the power (a 3dB increase).
What is the ideal distance between my Klipsch speakers?
The left and right front speakers should be at least six feet apart and at an identical distance from the screen, forming an equilateral triangle with the primary viewing/listening position. Some toe-in could be beneficial to improve the experience further.
Floor-standing speakers provide an immersive sound experience and look great and integrate with most home decors. Klipsch speakers are tiny enough to fit next to TV cabinets and bookshelves while producing theatre-quality sound. When it comes to floor-standing speakers, the RP-820F and RP-8000F are both excellent options.
Both speakers can provide realistic sound; however, the Klipsch RP-820f has greater power and a more hypnotic tone than the Klipsch RP-8000f. The mids and voices are flawlessly smooth, and the overall output is clear, detailed, and comprehensive. Although it produces an excellent sound like a 2.0 system, it can be upgraded to a 2.1, 5.0, or 5.1 system to improve the output, making it a versatile option for home theatre systems.