Using an IR Emitter Remote Controls

Using IR Emitter and Extender Systems in Your Home Theater


A remote control is useful, but your average remote requires you to be in a line-of-sight position with your AV equipment. Furthermore, many remotes simply don’t have much off-axis ability and, as such, commands go unrecognized. This is a big deal if you’re using “Favorites” that send multiple keypad or digit commands to your set top box in order to recall a particular channel by name or icon. Another problem arises when you have some of your gear located in a place that’s not in line with your television. I’ve got three locations in my home where this is an issue. Using IR emitter and extender systems in your home theater solves these problems.

First, take my living room. I have a television mounted above an inactive fireplace. My equipment rack, however, is located in the corner of the room. In my home theater, my equipment rack is located in a closet, making it impossible to reach with a standard remote control. And, finally, my bedroom has a wall-mounted television, but all of my AV equipment is located in a walk-in closet.

So what do you do? As it turns out, there may be a simple, low-cost solution in the form of an IR emitter and detector/receiver.

Using IR Emitters and an IR Receiver in Your Home Theater

Placing and using IR emitters and a receiver in your home theater will allow you to point your remote control(s) at a single location which can collect or receive all of the commands and forward them to a hard-wired emitter located near your gear. It is this sort of basic system that can revolutionize and streamline your remote control of equipment. It also gives you the flexibility to put things where you want them, rather than having to arrange your equipment simply so that everything can be reached by your remote—universal or otherwise.

An IR receiver is a simple device that accepts a wide range or infrared signals and sends them along a hard line to an emitter. These are typically active devices, so you’ve got to have power somewhere—typically at the other end where the IR signals are once again recreated (emitted) for the benefit of your AV equipment. Many IR emitter/receiver systems come with the ability to connect a single receiver and multiple emitters. In this way you can be very specific with reaching every piece of gear you own.

[top-seller category_id=’460′ product_count=’4′ title=’Popular IR Products’]

Locating the IR Receiver on Your AV Equipment

using flashlight IR receiverFor many pieces of gear, locating the IR receiver is no big deal. You can look for a circular piece of glass on the front of a device that hides the receiver just below. On other equipment, however, it may be a bit harder, making using IR emitters a bit tougher. On some gear, a single larger piece of glass may be used for the LCD display. In this case, use a flashlight to shine through the front panel display and locate the IR receiver underneath. You’ll be able to locate it because it will be separate from the actual LCD or VFD panel. Once you know where this is located, that’s where you’ll put the IR emitter (blaster) so that it can “talk” to that particular piece of AV gear.

finding IR receiver

Where on earth is the IR receiver on this thing? Hint: Go get a flashlight!

Hooking It All Up and Using IR Emitters and a Receiver

Using IR emitters and a receiver and getting it working isn’t difficult. An overview of the process is as follows:

  1. Place the primary IR receiver in a location where it can accept IR signals easily from the main remote control(s)
  2. Ensure the IR receiver is hardwired to the emitter box, which is usually powered and located alongside your AV equipment (this ensures that you only have to run a single cable out to your living room or theater space).
  3. Connect the IR emitters (sometimes referred to as “IR blasters”) to the emitter box.
  4. Affix each IR emitter to the proper location on each piece of gear (directly in front of the equipment’s IR receiver). If your system came with an emitter that is meant to be “blasted” from a distance, then place it (or if more than one, “them”) in a suitable location so they can reach your AV equipment.
  5. Test and adjust as needed

IR emitter receiver diagram

Using IR emitters and a detector (receiver) in your home theater can really simplify how you control your AV devices. There’s no reason to have to jump to a fancy RF remote system if all you need is to relocate your remote sensor in a room…of course an RF remote control system is a whole other step up and you should probably check that out as well if you find that rearranging your line of sight issues still isn’t accomplishing your goals.

Shop for IR Emitter Systems

Did we miss anything? If so, leave us a comment below or chime in on our Facebook discussion.


Leave a Comment

Your email address will not be published. Required fields are marked *