For accurate reproduction of a multi-channel soundtrack, the three front-channel speakers must offer the identical sonic signature. Though many competing systems offer individual speakers which physically look alike, upon an initial listen, it is often obvious they do not sound anything alike. For this reason, the 2400 C center channel utilizes the same driver components as the matching 2400 and 1400 LR speakers.
The 2400 C is designed to be placed horizontally and features an advanced tilting base to provide optimum sonic coverage of the listening area even when mounted higher or lower than the listener is seated.
A hallmark of Atlantic Technology speaker systems has always been the unusual vocal intelligibility they offer. Like all of our center channel speakers, Atlantic has included acoustic compensation controls which allow the listener to fine tune the speaker's response for varying placement situations or room acoustics.
The High Frequency Energy filter changes the tilt or roll-off slope of the tweeter and has been designed to help compensate for varying room acoustics.The Average position is intended for rooms with a reasonable combination of reflective (hard) and absorptive (soft) surfaces, while the Reverberant position is designed for rooms with an abundance of reflective surfaces like hardwood or tile floors, glass walls, etc. When used in this position, it decreases the high frequency output of the speaker to reduce excess HF energy that builds up in live rooms. The Damped position brings the tweeter’s output slightly above flat response, to compensate for overly absorbent rooms with extra soft and absorptive surfaces.
High frequency energy is not the only acoustic anomaly one needs to contend with. For that reason, the Boundary Compensation circuit was specially designed to adjust the lower frequency output of the 2200 C to compensate for sound colorations caused by placing the speaker near a TV screen, large boundary, or when built into a wall unit or custom cabinet. Although these controls have been designed to compensate for acoustic room anomalies, we recommend you try different combinations in order to hear first hand the affect they exhibit on the sound of the system.
Once again, Atlantic has taken a flagship feature designed for the THX Reference Standard 8200e system, and built the same level of control into the 2400 C, at a far lower price point.
Type: Sealed-box, 2-way D’Appolito array
Woofer: (2) 4 1⁄2” GLH (2)
Tweeter: (1) 1" Low Resonance Tweeter
Frequency Response: 90Hz – 20kHz ±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2.25kHz, 2nd order
Recommended Amplifier Power: 10 – 140 Watts RMS
Magnetic Shielding: Yes
Dimensions w/ grilles: (W x H x D) 14.6 x 7.5 x 7" (370 x 191 x 178mm)
Weight: (ea) 8lbs; 3.6kg w/base
|Dimensions (WxHxD, metric)||-|
|Unit of measurement||ea|
|Power Handling (Nominal)||-|
|Frequency Response +/-3dB||30Hz - 250Hz +/- 3 dB|